centrifugal spray dryer
TOPTION ISO CE certifited spray dryer is mainly used to make liquid material directly into micro powder, you don’t need to do material filtration, concentration and smash before drying, very convenient and make your drying process high efficient. And the spray dried powder product has a uniform particle size, more than 95% of the dry powder is in the same particle size. This high speed centrifuge spray dryer is suitable for all solution such as emulsion, suspending liquid,etc.
Technical parameters of pharmaceutical spray dryer
| Item | Unit | TP-S50 | TP-S100 |
| Max capacity | ml/h | 5000 | 10000 |
| Temperature range of inlet air | ℃ | 140°C ~ 300°C
Adjustable | 50°C ~ 300°C |
| Temperature range of outlet air | ℃ | 80°C ~ 90°C | 30°C ~ 150°C |
| Spray system | / | Centrifugal nozzle | Centrifugal nozzle |
| Precision of temp | ℃ | ±1 |
| Dryer time | S | 1.0 ~ 1.5 |
| Speed of squirt pump | ml/h | 5000 | 10000 |
| Spray direction | / | Downwards co-current |
| Heater Power | / | 3KW 220V |
| Total power | / | 10KW 380V |
| Heat source | / | Electric |
| Air compressor | / | Built-in oil-free air compressor |
| Dried powder restoring rate | % | ≥95 | ≥98 |
| Maximum moisture evaporation | Kg/h | 5 | 10 |
Main features of spray drying equipment
1.The drying speed is fast. After the material liquid is atomized, the surface area is greatly increased. In the hot air flow, 95%-98% of the water can be evaporated instantly, and the drying time is only a few seconds.
2.Suitable for heat-sensitive materials. Since the liquid droplets and the hot air flow in the cocurrent direction, although the temperature of the hot air is higher, the material will not overheat when the water evaporates.
3.Wide range of use. A large number of materials with very different physical properties are produced with this. Such as polymers and resins, dyes and pigments, ceramics and glass, rust removers and insecticides, carbohydrates, dairy products, blood and fish products, fertilizers, organic and inorganic compounds, etc.
4.The powder product has good uniformity, fluidity and solubility, high product purity and good quality.
5.The production process is simplified and the operation & control are convenient.
Professional customization and OEM supported
1.Inlet air temperature
The temperature is increased to 350 degrees, currently the highest is customized to 350 degrees, the maximum standard temperature is 300 degrees.
2. Material replacement
Change the material to 316 stainless steel; 2L, 3L, 5L, 10L are all available; standard material is 304.
3 .Add dust collection system
